Description The 1.3 inch 240×240 IPS LCD screen is a small, high-resolution display that can be used to display text, graphics, and other types of information. The screen has a resolution of 240×240 pixels and uses in-plane switching (IPS) technology to provide wide viewing angles and good color accuracy. The ST7789 is a type of display controller that is commonly used with the 1.3 inch 240×240 IPS LCD screen. The ST7789 is a chip-on-board (COB) controller that integrates the display driver and interface circuits onto the same substrate as the LCD panel, which helps to reduce the size and cost of the display. To use a 1.3 inch 240×240 IPS LCD screen with a microcontroller, such as an Arduino, you will need to connect the screen to the microcontroller using a suitable connector or set of wires. The screen will typically have a set of pins or a connector for the microcontroller, as well as a connector for the display and a connector for the backlight. You will also need to install a library or firmware that provides functions for controlling the display and drawing text and graphics to the screen. This low-voltage min LCD is easy to use and due to the low resolution of 2440×240 has a quick refresh rate. Product Details: SIZE 1.3inch Display Mode Normally black IPS Display Format Graphic 240RGB*240 Dot-matrix Input Data SPI interface Drive IC ST7789VW Dimensional outline 27.78(W)*39.22 (H)*3.0 /-0.1(T)mm Resolution 240RGB*240 Dots LCD Active area 23.4 (W)*23.4 (H) Dot pitch 0.0975(H) x 0.0975(V) mm Viewing Direction All View Operating Temperature -20～70°C Pin Descriptions： PIN No Symbol Description 1 GND Ground 2 VCC Power 3.3V 3 SCL Serial clock pin. 4 SDA Serial data input 5 RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 6 DC Data/Command Control 7 BLK Backlight control pin Screenshot Screenshot Screenshot Screenshot Packing List: 1 x 1.3 inch 240×240 Pixel ST7789 TFT IPS Display
